Turn the ignition switch OFF and disconnect the battery (-) terminal.
Disconnect the mass air flow sensor connector (A) and the installation clamp (B).
Remove the air intake hose (C) from the mass air flow sensor.
Intake air temperature sensor mounting bolt:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
Intake air temperature sensor clamp mounting screw:
2.9 ~ 4.9 N.m (0.3 ~ 0.5 kgf.m, 2.2 ~ 3.6 lb-ft)
Remove the mass air flow sensor after removing the installation bolts.
Turn the ignition switch OFF and disconnect the battery (-) terminal.
Remove the air duct (A).
Disconnect the intake air temperature sensor connector (A).
Disconnect the intake air temperature sensor (B) after removing the installation bolt.
