3.
Measure resistance between sensor signal terminal and ground terminal.
EGTS #1
EGTS #2
Turn ignition switch OFF.
Disconnect the connector of exhaust gas temperature sensors #1/#2.
Measure resistance between sensor signal terminal and ground terminal.
Check that the resistance is within the specification.
Temperature [℃(℉)] | Resistance(㏀) |
100(212) | 289.0 ~ 481.0 |
300(572) | 5.30 ~ 6.61 |
600(1,112) | 0.35 ~ 0.38 |
900(1,652) | 0.08 ~ 0.09 |
Temperature [℃(℉)] | Resistance(㏀) |
100(212) | 289.0 ~ 481.0 |
300(572) | 5.30 ~ 6.61 |
600(1,112) | 0.35 ~ 0.38 |
900(1,652) | 0.08 ~ 0.09 |
Turn the ignition switch OFF and disconnect the battery (-) cable.
Disconnect the exhaust gas temperature sensor connector (A).
Remove the exhaust gas temperature sensor (B).
Turn the ignition switch OFF and disconnect the battery (-) terminal.
Disconnect the exhaust gas temperature sensor connector (A).
Remove the exhaust gas temperature sensor (B).
Install the component to the specified torques.
Note that internal damage may occur when the component is dropped. In this case, use it after inspecting.
Install in the reverse order of removal.
Exhaust gas temperature sensor :
39.2 ~ 49.1 N.m (4.0 ~ 5.0 kgf.m, 28.9 ~ 36.2 lb-ft)
