1.
Open the fuel filler door and then remove the filler-neck mounting screws (A).
Filler-neck assembly mounting screw :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
Open the fuel filler door and then remove the filler-neck mounting screws (A).
Filler-neck assembly mounting screw :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
Lift the vehicle.
Remove the rear left wheel & tire and the wheel house.
Disconnect the fuel filler hose (A), and the leveling hose (B).
Remove the filler-neck assembly from the vehicle after removing the bracket mounting bolt (A).
Filler-neck assembly bracket mounting bolt :
3.9-5.9 N.m (0.4-0.6 kgf.m, 2.9-4.3 lb-ft)
Install in the reverse order of removal.
