Adjustment
note
●

After replacing the Electric EGR control valve, the "Component Change Routine" procedure MUST be performed. Otherwise, trouble related with engine performance or emission control may occur until ECM learning on the component is over.

1.

Turn ignition switch OFF.

2.

Connect the GDS to Data Link Connector (DLC).

3.

Turn the ignition switch ON.

4.

Select "Vehicle, Model year, Engine, System".

5.

Select "Vehicle S/W Management".

6.

Select "Component Change Routine".

7.

Select " EGR Valve Change".

8.

When the message is prompted, turn the ignition switch OFF and then turn it ON again in 20 seconds.

Яндекс.Метрика