1.
Install the cylinder head cover.
(1)
Install new cylinder head cover gasket (A) on the cylinder head cover (B).
note
Do not reuse the cylinder head cover gasket.
(2)
The hardening sealant located on the upper area between timing chain cover and cylinder head should be removed before assembling cylinder head cover.
(3)
After applying sealant (MS721-40AA), it should be assembled within 5 minutes.
Bead width : 2.0 ~ 3.0 mm (0.08 ~ 0.12 in.)
(4)
Install the cylinder head cover bolts as following method with two steps.
Tightening torque :
Step 1 : 3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
Step 2 : 7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft)
