1.
Install the camshaft (A), and then install the intake CVVT assembly (B) and exhaust CVVT assembly (C).
Install the camshaft (A), and then install the intake CVVT assembly (B) and exhaust CVVT assembly (C).
Install the front camshaft bearing cap (A) and the camshaft bearing caps (B) as following method with specified torque.
Tightening torque :
1st step
A : 9.8 N.m (1.0 kgf.m, 7.2 lb-ft)
B : 5.9 N.m (0.6 kgf.m, 4.3 lb-ft)
2nd step
A : 18.6 ~ 22.6 N.m (1.9 ~ 2.3 kgf.m, 13.7 ~ 16.6 lb-ft)
B : 11.8 ~ 13.7 N.m (1.2 ~ 1.4 kgf.m, 8.7 ~ 10.1 lb-ft)
Arrow on the top of cap must to outside of engine.
Install the other parts in the reverse order of removal.
