3.
Install the ladder frame (A).
(1)
Using a gasket scraper, remove all the old packing material.
note
Be careful not to damage the contact surfaces.
(2)
Install the O-ring (A) to cylinder block.
(3)
Before assembling the ladder frame, the liquid sealant TB1217H should be applied on ladder frame.
The part must be assembled within 5 minutes after the sealant was applied.
Bead width : 2.5 ~ 3.5 mm (0.1 ~ 0.14 in)
(4)
Install and uniformly tighten the ladder frame bolts, in several passes.
Tightening torque :
19.6 ~ 23.5 N.m (2.0 ~ 2.4 kgf.m, 14.5 ~ 17.4 lb-ft)
