6.
Disconnect the radiator upper hose (A).
Disconnect the battery negative terminal.
Remove the air duct and air cleaner assembly.
(Refer to Intake And Exhaust System - "Air Cleaner)
Remove the battery and tray.
(Refer to Engine Electrical System - "Battery")
Remove the engine room front under.
(Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")
Drain the coolant.
(Refer to Cooling System - "Coolant")
Disconnect the radiator upper hose (A).
Disconnect the radiator lower hose (A).
Disconnect the fan motor connector (A).
Remove the front bumper cover.
(Refer to body - "Front Bumper Cover")
Remove the air guard (A).
Tightening torque :
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
Remove the radiator upper member assembly (A).
Tightening torque :
21.6 ~ 26.5 N.m (2.2 ~ 2.7 kgf.m, 16.0 ~ 19.5 lb-ft)
Separate the condenser from the radiator and then pull radiator (A) up and remove it from engine room.
Remove the fan assembly (B) from the radiator (A).
Tightening torque :
4.9 ~ 7.8 N.m (0.5 ~ 0.8 kgf.m, 3.6 ~ 5.8 lb-ft)
Install in the reverse order of removal.
Fill with engine coolant.
(Refer to Cooling System - "Coolant")
Start engine and check for leaks.
Recheck engine coolant level.
