4.
Disconnet the over flow hose (A).
Disconnect the negative battery terminal.
Remove the air cleaner assembly.
(Refer to Intake and exhaust system - "Air Cleaner")
Remove the battery and tray.
(Refer to Engine Electrical System - "Battery")
Disconnet the over flow hose (A).
Disconnect the fan motor connector (A).
Separate the filler neck (A) from the radiator upper member assembly.
Tightening torque :
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)
Remove the cooling fan assembly (A).
Tightening torque :
4.9 ~ 7.8 N.m (0.5 ~ 0.8 kgf.m, 3.6 ~ 5.8 lb-ft)
Install in the reverse order of removal.
Disconnect the wire harness connector (A) and fan motor connector (B).
Remove the resistor (A) from fan shroud.
Tightening torque :
2.8 ~ 3.3 N.m (0.29 ~ 0.34 kgf.m, 2.06~2.43 lb-ft)
Install in the reverse order of removal.
