3.
Remove the oil pan (A).
Insert the blade of SST (09215-3C000) between the ladder frame and the oil pan. Cut off applied sealer and remove the oil pan.
note
●
Insert the SST between the ladder frame and the oil pan by tapping it with a plastic hammer in the direction of (1) arrow.
●
After tapping the SST with a plastic hammer along the direction of (2) arrow around more than 2/3 edge of the oil pan, remove it from the oil pan.
●
Do not turn over the SST abruptly without tapping. It be result in damage of the SST.
●
Be careful not to damage the contact surfaces of ladder frame and oil pan.
