1.
Install the camshafts (A).
Install the camshafts (A).
Install the camshaft front bearing cap (A), camshaft middle bearing cap (B), and camshaft rear bearing cap (C) in the sequence shown.
Tightening torque :
Step 1
A : 9.8 N.m (1.0 kgf.m, 7.2 lb-ft)
B : 5.9 N.m (0.6 kgf.m, 4.3 lb-ft)
Step 2
A : 18.6 ~ 22.6 N.m (1.9 ~ 2.3 kgf.m, 13.7 ~ 16.6 lb-ft)
B : 11.8 ~ 13.7 N.m (1.2 ~ 1.4 kgf.m, 8.7 ~ 10.1 lb-ft)
C : 11.8 ~ 13.7 N.m (1.2 ~ 1.4 kgf.m, 8.7 ~ 10.1 lb-ft)
Install the intake CVVT assembly (A) and exhaust CVVT assembly (B).
Tightening torque :
63.7 ~ 73.5 N.m (6.5 ~ 7.5 kgf.m, 47.0 ~ 54.2 lb-ft)
When installing the CVVT assembly hold the camshaft with a wrench to prevent the camshaft from rotating.
Install the remaining parts in the reverse order of removal.
