3.
Remove the engine mounting support bracket (A).
Tightening torque :
Nut (B) :
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.5 lb-ft)
Bolt (C) and nuts (D) :
58.8 ~ 73.5 N.m (6.0 ~ 7.5 kgf.m, 43.3 ~ 54.2 lb-ft)
Remove the engine room front under cover.
(Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")
Install the jack under the edge of lower oil pan to support the engine.
Put a rubber block between jack and oil pan to avoid damaging the oil pan.
Remove the engine mounting support bracket (A).
Tightening torque :
Nut (B) :
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.5 lb-ft)
Bolt (C) and nuts (D) :
58.8 ~ 73.5 N.m (6.0 ~ 7.5 kgf.m, 43.3 ~ 54.2 lb-ft)
Remove the reservoir tank.
(Refer to Cooling System - "Reservoir Tank")
Remove the engine mounting bracket (A).
Tightening torque :
63.7 ~ 83.3 N.m (6.5 ~ 8.5 kgf.m, 47.0 ~ 61.5 lb-ft)
Install in the reverse order of removal.
Remove the roll rod bracket (A).
Tightening torque
Bolt (B) :
107.9 ~ 127.5 N.m (11.0 ~ 13.0 kgf.m, 79.6 ~ 94.0 lb-ft)
Bolt (C) :
49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft)
Remove the roll rod mounting support bracket (A).
Tightening torque :
49.0 ~ 68.6 N.m (5.0 ~ 7.0 kgf.m, 36.2 ~ 50.6 lb-ft)
Install in the reverse order of removal.
Remove the air cleaner assembly.
(Refer to Intake and Exhaust System - "Air Cleaner")
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
Remove the engine room front under cover.
(Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")
Install the jack to the edge of transaxle.
Put a rubber block between jack and transaxle to avoid damaging the transaxle.
Remove the service cover (A).
Remove the transaxle support mounting bracket bolt (A).
Tightening torque :
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.5 lb-ft)
Remove the transaxle support bracket (A).
Tightening torque :
58.9 ~ 78.5 N.m (6.0 ~ 8.0 kgf.m, 43.4 ~ 57.9.0 lb-ft)
Remove the transaxle mounting bracket (A).
Tightening torque :
63.7 ~ 83.3 N.m (6.5 ~ 8.5 kgf.m, 47.0 ~ 61.5 lb-ft)
Install in the reverse order of removal.
