5.
Remove the water pump pulley (A).
Tightening torque :
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
Disconnect the negative battery terminal.
Remove the engine room front under cover.
(Refer to Engine And Transmission Assembly - “Engine Room Under Cover”)
Drain the coolant.
(Refer to Cooling System - "Coolant")
Remove the drive belt.
(Refer to Drive Belt System - “Drive Belt”)
Remove the water pump pulley (A).
Tightening torque :
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
Remove the water pump (A) with the O-ring.
Tightening torque :
9.8 ~ 11.8 N.m (2.0 ~ 2.7 kgf.m, 7.2 ~ 8.7 lb-ft)
When installing the water pump, use a new O-ring.
Install in the reverse order of removal.
Fill the radiator with coolant.
(Refer to Cooling System - "Coolant")
Start engine and check for leaks.
