13666947

1.

Remove the engine room side cover(RH).

(Refer to Engine And Transaxle Assembly - “Engine Room Under Cover”)

2.

Drain the engine oil.

(Refer to Lubrication System - "Engine Oil")

3.

Remove the oil pan (A).

Insert the blade of SST(09215-3C000) between the ladder frame and the oil pan. Cut out applied sealer and remove the oil pan.

note

●

Insert the SST between the ladder frame and the oil pan by tapping it with a plastic hammer in the direction of (1) arrow.

●

After tapping the SST with a plastic hammer along the direction of (2) arrow around more than 2/3 edge of the oil pan, remove it from the ladder frame.

●

Do not turn over the SST abruptly without tapping as it may damage the SST.

●

Be careful not to damage the contacting surfaces of ladder frame and oil pan.

4.

Remove the oil screen (A).