Install the oil screen (A).
Tightening torque :
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
Apply engine oil on O-ring before installation of the engine oil screen.
Remove harmful dust or parts around assembled area of the oil screen.
Using a gasket scraper, remove all the old packing material from the gasket surfaces.
Before assembling the oil pan, the liquid sealant should be applied on lower oil pan.
Assemble the part within 5 minutes of applying sealant.
Bead width : 3.0 ~ 4.0 mm (0.12 ~ 0.16 in)
Sealant : TB1217H or LOCTITE 5900H
Clean the sealing face before assembling two parts.
Remove harmful foreign materials on the sealing face before applying sealant.
When applying sealant gasket, sealant must not protrude into the oil pan.
To prevent leakage of oil, apply sealant gasket to the inner threads of the bolt holes.
Install the oil pan (A).
Uniformly tighten the bolts in several passes.
Tightening torque :
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
Install the remaining parts in the reverse order of removal.
Refill with the engine oil.
(Refer to Lubrication System - "Engine Oil")
