3.
Disconnect the intercooler outlet hose (A).
Remove the engine cover.
(Refer to Engine And Transaxle Assembly - "Engine Cover")
Remove the air cleaner assembly.
(Refer to Intake And Exhaust System - "Air Cleaner")
Disconnect the intercooler outlet hose (A).
Separate the electronic throttle control (ETC).
(Refer to Engine Control / Fuel System - "ETC (Electronic Throttle Control) System")
Disconnect the positive crankcase ventilation (PCV) hose (A) and vacuum hose (B).
Remove the coolant return pipe mounting bolt (A).
Tightening torque :
19.6 ~ 26.5 N.m (2.0 ~ 2.7 kgf.m, 14.5 ~ 19.5 lb-ft)
Remove the engine room front under cover.
(Refer to Engine And Transaxle Assembly - "Engine Room Under Cover")
Remove the wiring connector bracket (A).
Remove the intake manifold stay (A).
Tightening torque :
18.6 ~ 23.5 N.m (1.9 ~ 2.4 kgf.m, 13.7 ~ 17.4 lb-ft)
Remove the intake manifold (A) with the gasket.
Tightening torque :
18.6 ~ 23.5 N.m (1.9 ~ 2.4 kgf.m, 13.7 ~ 17.4 lb-ft)
When installing, replace with new gaskets.
When installing the intake manifold, tighten the bolts and nuts with pre-torque first, and then tighten the bolts and nuts with specified torque in the sequence shown.
Install in the reverse order of removal.
