Remove the engine room front under cover and RH side cover.
(Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")
Remove the drive belt.
(Refer to Drive Belt System - "Drive Belt")
Remove the idler (A).
Tightening torque :
53.9 ~ 63.7 N.m (5.5 ~ 6.5 kgf.m, 39.8 ~ 47.0 lb-ft)
If mounting bolt (A) and idler (B) are disassembled, make sure that the dust cover (C) is assembled in the original direction.
If direction is not correct, it may cause noise and durability problem.
Install in the reverse order of removal.
Check the idler for grease leak, abnormal rotation and vibration. Replace if necessary.
