Remove the engine room front under cover and RH side cover.
(Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")
Remove the drive belt.
(Refer to Drive Belt System - "Drive Belt")
Remove the RH side front wheel.
(Refer to Suspension System - "Wheel")
Remove the crankshaft damper pulley.
Using the SST (09231-2M100, 09231-2J210) to hold the crankshaft damper pulley (A).
Remove the crankshaft damper pulley bolt and then remove the crankshaft damper pulley (A).
Tightening torque :
[55.9 ~ 61.8 N.m (5.7 ~ 6.3 kgf.m, 41.2 ~ 45.6 lb-ft)] +47 ~ 50°
Install in the reverse order of removal.
Check the crankshaft damper pulley for vibration during rotation, and oil or dust deposit on V-ribbed part. Replace if necessary.
