3.
Remove the rear oil seal (A).
Remove the transaxle assembly.
(Refer to Manual Transaxle System - "Manual Transaxle")
Remove the flywheel.
(Refer to Cylinder Block - "Flywheel")
Remove the rear oil seal (A).
Install the new rear oil seal.
Apply engine oil to a new oil seal lip.
Using the SST(09214-2A100, 09231-H1100) and a hammer, tap in the oil seal until its surface is flush with the rear oil seal retainer edge.
Do not reuse the rear oil seal.
Install the remaining parts in the reverse order of removal.
