2.
Remove the oil pan cover (A).
When the oil sensor signal fault occurs, refer to the DTC guide.
Drain the engine oil.
Remove the oil pan cover (A).
Remove the sensor protector (A).
Tightening torque:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
Remove the oil level sensor (B) after disconnecting the oil level sensor connector (A).
Tightening torque:
8.8 ~ 9.8N.m (0.9 ~ 1.0kgf.m, 6.5 ~ 7.2lb-ft)
Install in the reverse order of removal, with a new gasket.
