2.
Remove the rear wheel and tire (A) from rear hub.
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
caution
●
Be careful not to damage to the hub bolts when removing the rear wheel and tire (A).
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
Remove the rear wheel and tire (A) from rear hub.
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
Be careful not to damage to the hub bolts when removing the rear wheel and tire (A).
Remove the rear shock absorber.
(Refer to Rear Suspension System - "Rear Shock Absorber")
Remove the sprit pin and castle nut and then disconnect the rear assist arm (A) from the rear axle.
Tightening torque:
44.1 ~ 54.9 N.m (4.5 ~ 5.5 kgf.m, 32.5 ~ 39.8 lb-ft)
Using the SST (09568-4A000), disconnect the assist arm (A) from the carrier assembly.
Loosen the bolt & nut and then remove the rear assist arm (A) from the sub frame.
Tightening torque:
107.9 ~ 117.7 N.m (11.0 ~ 12.0 kgf.m, 79.6 ~ 86.8 lb-ft)
Install in the reverse order of removal.
Check the bushing for wear and deterioration.
Check for all bolts and nut.
