3.
Disconnect the solenoid valve connector (A).
Turn ignition switch OFF.
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air cleaner")
Disconnect the solenoid valve connector (A).
Measure the resistance between power terminal (14) and signal terminal (8).
Specification : Approx. 0.88 MΩ
Remove the valve body assembly.
(Refer to Hydraulic System - "Valve Body")
Disconnect the input & output speed sensor connector (A).
Remove the input & output speed sensor (B) after loosening the bolts.
Tightening torque :
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
Install in the reverse order of removal.
Refill the automatic transaxle with fluid.
(Refer to Hydraulic System - "Fluid")
Confirm that there is no fluid leakage on connections after repairing.
