1.
Install in the reverse order of removal.
note
●
The existing valve body cover gasket (A) must be replaced with new one. (Do not reuse it.)
●
Perform the procedures below after replacing the solenoid valve.
1.
Refill the automatic transaxle with fluid.
(Refer to Hydraulic System - "Fluid")
2.
Reset the automatic transaxle adaptive values using the GDS.
3.
Perform the TCM adaptive values learning procedure.
(Refer to Automatic Transaxle Control System - "Repair procedures")
4.
Confirm that there is no fluid leakage on connections after repairing.
