2.
Remove the under covers (A).
Tightening torque:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
Turn ignition switch OFF and disconnect the negative (-) battery cable.
Remove the under covers (A).
Tightening torque:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
Disconnect the vacuum pump connector (A).
Disconnect the vacuum hose (B).
Loosen the vacuum pump bracket bolts (A), and then remove vacuum pump and bracket.
Tightening torque:
6 ~ 8 N.m (0.61 ~ 0.82 kgf.m, 4.4 ~ 5.9 lb-ft)
Disconnect the battery negative terminal.
Disconnect the wiring connectors and harness clamps and remove the connector brackets around the vacuum pump.
Remove the air intake hose.
(Refer to Engine Mechanical System - "Air Cleaner")
Disconnect the brake booster vacuum hose (A).
Disconnect the vacuum hose (A).
Remove the water fitting.
(Refer to Engine Mechanical System - "Water Temperature Control Assembly")
Remove the wiring bracket (A) and then remove the vacuum pump (B).
Tightening torque :
18.6 ~ 22.6 N.m (1.9 ~ 2.3 kgf.m, 13.7 ~ 16.6 lb-ft)
Install in the reverse order of removal.
