2.
After loosening the mounting bolts, then remove the rear seat latch (A).
Tightening torque :
21.6 ~ 23.5 N.m (2.2 ~ 2.4 kgf.m, 15.9 ~ 17.4 lb-ft)
Put on gloves to protect your hands.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
Remove the rear seat back cover [LH].
(Refer to Rear Seat - "Rear Seat Back Cover")
After loosening the mounting bolts, then remove the rear seat latch (A).
Tightening torque :
21.6 ~ 23.5 N.m (2.2 ~ 2.4 kgf.m, 15.9 ~ 17.4 lb-ft)
Install in the reverse order of removal.
Replace any damage clips.
Put on gloves to protect your hands.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
Remove the rear seat back cover [RH].
(Refer to Rear Seat - "Rear Seat Back Cover")
After loosening the mounting bolts, then remove the rear seat latch (A).
Tightening torque :
21.6 ~ 23.5 N.m (2.2 ~ 2.4 kgf.m, 15.9 ~ 17.4 lb-ft)
Install in the reverse order of removal.
Replace any damage clips.
