3.
Remove the BSD unit (A) after loosening the mounting nuts.
[3.5 Door]
(LH)
(RH)
[Wagon]
(LH)
(RH)
note
Take care not to separate the bracket from rear bumper when removing the BSD sensor.
Disconnect the negative (-) battery terminal.
Remove the rear bumper cover.
(Refer to Body - "Rear Bumper Cover")
Remove the BSD unit (A) after loosening the mounting nuts.
(LH)
(RH)
(LH)
(RH)
Take care not to separate the bracket from rear bumper when removing the BSD sensor.
Install the BSD units to the rear bumper.
Install the rear bumper cover.
Connect the negative (-) battery terminal.
Take care not to confuse left side (master) and right side (slave) unit when installing.
BSD units connector connect to the wiring connector.
