11.
Remove the Engine support bracket (A).
Use fender covers to avoid damaging painted surfaces.
To avoid damage, unplug the wiring connectors carefully while holding the connector portion.
Mark all wiring and hoses to avoid misconnection.
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
Remove the drive belt idler.
(Refer to Timing System - "Idler")
Remove the alternetor.
(Refer to Engine Electrical System - "Alternator")
Remove the alternetor bracket.
(Refer to Timing Systme - "Drive Belt Tensioner")
Remove the engine room under cover.
Remove the crankshaft damper pulley.
(Refer to Timing System - Crankshaft Damper Pulley")
Remove the water pump.
(Refer to Cooling System - "Water Pump")
Remove the air cleaner assembly.
(Intake and Exhaust System - "Air Cleaner")
Remove the cylinder head cover.
(Refer to Cylinder Head Assembly - "Cylinder Head Cover")
Remove the engine mounting support bracket.
(Refer to Engine And Transmission Assembly - "Engine Mounting")
Remove the Engine support bracket (A).
Remove the Timing Chain Cover (A).
