3.
Remove the rear oil seal(A).
Remove the manual transaxle.
(Refer to Manual Transaxle System - "Manual Transaxle")
Remove the flywheel.
(Refer to Cylinder Block - "Flywheel")
Remove the rear oil seal(A).
Install the rear oil seal.
Apply engine oil to a new oil seal lip.
Using the SST(09231-H1100, 09231-2B200) and a hammer, tap in the oil seal until its surface is flush with the rear oil seal retainer edge.
Install the flywheel.
(Refer to Cylinder Block - "Flywheel")
Install the manual tranaxle.
(Refer to Manual Transaxle System - "Manual Transaxle")
