3.
Disconnect the over flow hose (A) from radiator.
Disconnect the battery negative (-) terminal.
Remove the air duct and RCV hose.
(Refer to Intake and Exhaust System - "Air Cleaner")
Disconnect the over flow hose (A) from radiator.
Disconnect the fan controller connectors (A).
Remove the fan controller assembly (B).
Tightening torque :
4.9 ~ 8.3 N.m (0.5 ~ 0.85 kgf.m, 3.6 ~ 6.1 lb-ft)
Disconnect the radiator upper hose (A).
Remove the filler neck assembly bolts (A).
Remove the MAPS.
(Refer to Engine Control / Fuel System - "Manifold Absolute Pressure Sensor(MAPS)")
Remove the cooling fan assembly.
Tightening torque :
4.9 ~ 7.9 N.m (0.5 ~ 0.8 kgf.m, 3.6 ~ 5.8 lb-ft)
Install in the reverse order of removal.
