2.
Remove the radiator upper hose (A) and lower hose (B).
note
Install the radiator hoses as shown illustrations.
Remove the cooling fan.
(Refer to Cooling System - "Cooling Fan")
Remove the radiator upper hose (A) and lower hose (B).
Install the radiator hoses as shown illustrations.
Disconnect the ATF cooler hoses.
(Refer to Automatic Transaxle System - "Automatic transaxle")
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
Remove the head lamps.
(Refer to Body Electrical System - "Head Lamps")
Remove the air guard (A).
Tightening torque :
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 Ib-ft)
Remove the radiator upper bracket (A).
Remove the A/C pipe mounting bracket bolt (A).
Separate the A/C condenser from the radiator and then lift up the radiator assembly (A).
Installation is reverse order of removal.
Fill with engine coolant.
(Refer to Cooling System - "Coolant").
Start engine and check for leaks.
Recheck engine coolant level.
