Removal and Installation
1.

Remove the engine cover.

2.

Disconnect the battery negative terminal.

3.

Remove the air duct (A).

4.

Disconnect the MAFS (Mass Air Flow Sensor) connector & IATS (Intake Air Temperature Sensor) Connector (B).

5.

Disconnect the breather hose (C).

6.

Remove the intake hose (D) and air cleaner assembly (E).

Tightening torque

Hose clamp :

2.9 ~ 4.9N.m (0.3 ~ 0.5kgf.m, 2.2 ~ 3.6lb-ft)

Air cleaner bolts :

3.9 ~ 5.9N.m (0.4 ~ 0.6kgf.m, 2.9 ~ 4.3lb-ft)

note

When installing the air intake hose, confirm the assembly mark of hose to that of turbocharger.

7.

Install in the reverse order of removal.

Яндекс.Метрика