4.
Disconnect the over flow hose (A) from the radiator.
Disconnect the battery negative terminal.
Remove the air cleaner assembly.
(Refer to Intake and exhaust system - "Air Cleaner")
Remove the battery tray.
(Refer to Engine Electrical System - "Battery")
Disconnect the over flow hose (A) from the radiator.
Disconnect the fan motor connector (A).
Remove the filler neck assembly bolts(A).
Remove the cooling fan assembly(A).
Tightening torque :
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)
Installation is in the reverse order of removal.
