2.
Disconnect the battery negative (-) terminal (A).
Battery negative (-) terminal tightening nut :
4.0 ~ 6.0 N.m (0.4 ~ 0.6 kgf.m, 3.0 ~ 4.4 lb-ft)
After disconnecting then reconnecting the battery negative cable, reset some parts that require the reset procedures.
(Refer to Body Electrical System – "General Information")
Turn the ignition switch OFF.
Disconnect the battery negative (-) terminal (A).
Battery negative (-) terminal tightening nut :
4.0 ~ 6.0 N.m (0.4 ~ 0.6 kgf.m, 3.0 ~ 4.4 lb-ft)
Disconnect the battery positive (+) terminal (A).
Battery positive (+) terminal tightening nut :
7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.2 ~ 8.7 lb-ft)
Remove the air cleaner.
(Refer to Engine Mechanical System - "Air Cleaner")
Remove the battery mounting bracket (A) after loosening the mounting bolt.
Remove the battery (B).
Battery mounting bracket mounting bolt :
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)
Remove the battery.
(Reter to Engine Electrical System - "Battery")
Disconnect the ECM Connector (A).
Remove the mounting bolts and nut, and then remove the ECM bracket assembly (B).
Remove the battery tray (A) after loosening the mounting bolts
Battery tray mounting bolt:
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)
