2.
Disconnect the alternator connector (A), and remove the cable (B) from alternator "B" terminal.
Turn ignition switch OFF and disconnect the battery negative (-) terminal.
Disconnect the alternator connector (A), and remove the cable (B) from alternator "B" terminal.
Remove the engine room under cover (A).
Remove the engine room RH under cover (A).
Using the hexagon wrench, turn the tensioner (A) counterclockwise and loosen. Then remove the drive belt (B).
Lift the RH side of the engine with a jack (A).
Disconnect the ground line (A).
Remove the engine mounting support bracket (A) after loosening the mounting bolt and nuts.
Tightening torque :
49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft)
Remove the alternator mounting bolts (A).
Remove the alternator.
