4.
Remove the steering wheel cover (A) after loosening the screws.
Disconnect the negative (-) battery terminal.
Remove the driver airbag module.
(Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring")
Remove the steering wheel.
(Refer to Steering System - "Steering Column and Shaft")
Remove the steering wheel cover (A) after loosening the screws.
Disconnect the steering wheel remote control switch connector (A).
Disengage the steering wheel remote control switch assembly (A).
Remove the steering wheel remote control switch (A) and (B) after loosening screws.
Disconnect the battery negative (-) terminal.
Remove the driver airbag module.
(Refer to the RT group)
Remove the steering wheel.
(Refer to the ST group - "Steering column & shaft")
Loosen the mounting screws from the front steering wheel cover.
Remover the upper left steering wheel cover (A) after loosening the mounting screws.
Separate the upper steering wheel remote control switch (A) after loosening the mounting screw.
Remove the upper steering wheel remote control switch (A) after disconnecting the connector.
Install in the reverse order of removal.
Check the audio remote control switch (A) for resistance between terminals in each switch position.
Switch | Connector terminal | Resistance (±5%) |
CANCEL | 2-7 | 180 Ω |
SET- | 2-7 | 330 Ω |
RES+ | 2-7 | 550 Ω |
CUISE | 2-7 | 880 Ω |
Check the audio remote control switch (A) for resistance between connector terminals in each switch position.
Switch | Connector terminal | Resistance (±5%) |
CANCEL | 2-7 | 180 Ω |
SET- | 2-7 | 330 Ω |
RES+ | 2-7 | 550 Ω |
CUISE | 2-7 | 880 Ω |
