The SRSCM sets DTC B138300 when resistance of PSAB circuit is lowerer than 1.0Ω or there is opened circuit between low circuit and high circuit.
※ SRSCM checks if there's any fault in circuit by sending current for a while.
Item | Detecting Condition | Possible cause | |
DTC Strategy |
•
Check Resistance | 1. Poor connection of connected part. 2. Poor connection between shorting bar and release pin. 3. Faulty Side Airbag Front-Passenger 4. Check SRSCM | |
Enable Conditions |
•
Ignition Switch "ON" | ||
Threshold Value |
•
Side Airbag Front-Passenger resistance < 1.0Ω | ||
Diagnostic Time | Qualification |
•
1sec | |
De-Qualification |
•
2sec | ||
