DTC Description

LDWS ECU sets this code and turns on warning lamp if excessive low voltage caused by faulty alternator or poor connection in power supply circuit is detected.

DTC Detecting Condition

Item

Detecting Condition

Possible Cause

DTC Strategy

Supply power monitoring

1.

The poor contact of the power circuit wiring and connectors

2.

Poor ground circuit

3.

Over discharging

Enable Condition

Ignition "ON" or Engine "ON"

Threshold value

Vehicle Speed < 34.2 mile ,The battery voltage is less than 8.9 V after 10 seconds

Detecting time

0.2 ms

note

Typically, lane departure warning is activated at a speed over Approx 37.3 mile, in case of unintentional lane departure when driver do not operate turn signal.

caution

LDWS has limited lane recognition capabilities when it comes to sharp-bending roads, no or faded lane markings, low visibility due to foul weather conditions, low light or sudden change in exteriror light condition, sidewalks and other dividing structures along the edge of the lane, or dirty windshield but not only limited to these conditions.

Яндекс.Метрика