The SPAS ECU sends the request messages, such as ABS/ESP normal control, to the ABS/ESP through CAN bus line for SPAS.
The SPAS ECU check the CAN communication line for normal control and if the ABS/ESP message is not received for a 0.5 second, this DTC is set.
Item | Detecting Condition | Possible cause |
DTC Strategy |
•
Status for receiving CAN message from ABS/ESP ECU | 1. Open CAN high / Low line 2. ABS/ESP ECU |
Enable Condition |
•
Ignition "ON" | |
Threshold Value |
•
No CAN signal from ABS/ESP ECU | |
Diagnostic Time |
•
For more than 500 ms |
