After replacing new SPAS ECU, if variant coding is not done, new SPAS ECU sets this DTC. In this case, new SPAS ECU memorize this DTC as present. After installation the New SPAS ECU without performing variant Coding, SPAS ECU controls to blink SPAS / PAS switch indicator. If variant coding is completed, this DTC is set as history and switch indicator is also turned to off.
Item | Detecting Condition | Possible cause |
DTC Strategy |
•
SPAS Coding status check | 1. No variant Coding on SPAS 2. SPAS ECU |
Enable Condition |
•
Ignition "ON" | |
Threshold Value |
•
No variant Coding is performed | |
Diagnostic Time |
•
Immedately |
※ After SPAS Variant Coding, do Ignition S/W "OFF"
