If the sensor input signal is lower than 0.2V or the range of the MAP is lower than 10 kPa(0.1 bar/1.45 psi), the ECM/PCM sets DTC P0107.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Voltage Range Check | 1. Poor connection 2. Short to ground in signal circuit 3. MAPS |
Enable Conditions |
•
6V < Battery voltage < 16V | |
Threshold Value |
•
MAP sensor voltage < 0.25V(10 kPa) | |
Diagnostic Time |
•
Continuous. | |
Mil On Condition |
•
2 driving cycles. |
