If the measured temperature is higher than the maximum threshold value, the ECM/PCM sets DTC P0112.(In this case, the input signal voltage is the minimum threshold vaue.)
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Voltage Range Check | 1. Poor connection 2. Short to ground in signal circuit 3. IATS |
Enable Conditions |
•
6V < Battery voltage < 16V
•
Time after Start (only for SCB / OC, if IAT at Start < -30 °C ) > 105sec | |
Threshold Value |
•
IAT voltage < 0.1V (142.5°C ) | |
Diagnostic Time |
•
Continuous. | |
Mil On Condition |
•
2 driving cycles. |
