3.
Measure resistance between Pin No. 1 (power) and Pin No. 2 (control) terminal of the VIS. (Component Side)
Specification : 30.0 ~ 35.0 [20℃(68℉)]
Fig.1) Resistance of VIS
IG Key "OFF".
Disconnect VIS connector.
Measure resistance between Pin No. 1 (power) and Pin No. 2 (control) terminal of the VIS. (Component Side)
Specification : 30.0 ~ 35.0 [20℃(68℉)]
Fig.1) Resistance of VIS
Is the measured Value within specification?
 | ▶ Go to "Verification of Vehicle Repair" procedure. |
 | ▶ If no problems were found with the circuits or connectors, Replace the VIS. |
