If the sensor input signal is lower than 0.254V or the range of the MAP is lower than 10 kPa(0.1 bar/1.45 psi), the ECM/PCM sets DTC P0107.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Signal check, low | 1. Poor connection 2. Short to ground in signal circuit 3. MAPS |
Enable Conditions |
•
Time duration for which signal voltage keeps over the threshold is higher than 3 sec. | |
Threshold Value |
•
Sensor voltage is lower than 0.254 V | |
Diagnostic Time |
•
Continuous | |
Mil On Condition |
•
3 driving cycles |
