If the sensor input voltage is lower than the minimum threshold value during 0.14 sec under normal driving condition, ECM/PCM sets DTC P0222.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
TPS2 Signal check, low | 1. Poor connection 2. Short to ground in signal harness 3. TPS 4. ECM/PCM |
Enable Conditions |
•
IG "ON" | |
Threshold Value |
•
The voltage of TPS2 less than 0.156V | |
Diagnostic Time |
•
0.14 sec. | |
Mil On Condition |
•
5 sec. |
