Component Inspection
■ Check WSS performance
1.

IG KEY "OFF".

2.

Connect CHA probe to WSS signal terminal(Pin No.2) of WSS connector.

3.

ENG On / Shift lever "D"(Front Wheel Speed Sensor)

Specification :

V_low : 0.59V ~ 0.84V

V_high : 1.18V ~ 1.80V

4.

Is the measured signal waveform O.K?

▶ Go to "System Inspection" procedure.

▶ If no problems were found with the circuits or connectors, Replace the WSS.

▶ Go to "System Inspection" procedure.

Яндекс.Метрика