P0830 is set when no clutch switch signal change is detected after shifting gear during driving.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Signal monitoring | 1. Clutch switch circuit is open or short to battery or ground. 2. Faulty Clutch switch | |
Enable Conditions |
•
Vehicle running
•
Engine rpm over 1500 | ||
Threshold Value |
•
When the ECU can not sense the clutch position signal for 20 sec.
•
When the ECU sense the clutch position signal until vehicle speed 80 km/h. | ||
Fail Safe | Fuel Cut |
•
NO | |
EGR Off |
•
NO | ||
Fuel Limit |
•
NO | ||
Check Lamp |
•
NO | ||
