CKPS(A/T) | Terminal | Inspection Condition | Measured Value | Remarks | |
Pin No. | 1 | Sensor Shield | 1. Ignition Switch "ON", Engine "OFF" 2. Measure Voltage of Wiring Side(Disconnected) | Approx. 0V | - |
2 | CKPS Signal (High) | Approx. 2.5V | - | ||
3 | CKPS Signal (Low) | Approx. 2.5V | - | ||
CKPS(M/T) | Terminal | Inspection Condition | Measured Value | Remarks | |
Pin No. | 1 | Sensor Shield | 1. Ignition Switch "ON", Engine "OFF" 2. Measure Voltage of Wiring Side(Disconnected) | Approx. 0V | - |
2 | CKPS Signal (High) | Approx. 2.5V | - | ||
3 | CKPS Signal (Low) | Approx. 2.5V | - | ||
