If the intake manifold pressure is lower than the minimum threshold value or higher than the maximum threshold value, the PCM sets DTC P0106.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Compare with model. | 1. Poor connection 2. MAPS | |
Enable Conditions |
•
Intake manifold pressure greater than 10 kPa(0.1 bar/1.45 psi) and under 110 kPa(1.1 bar/15.95 psi). | ||
Threshold Value | Case1 |
•
Difference of MAP and Model MAP (High side) greater than 2.5 kPa(0.025 bar/0.36 psi). | |
Case2 |
•
Diffrence of MAP and Model MAP (Low side) less than -2.5 kPa(-0.025 bar/-0.36 psi). | ||
Diagnostic Time |
•
Immediate. | ||
MIL ON Condition |
•
2 driving cycles. | ||
