If the sensor input signal is lower than 0.2V or the range of the MAP is lower than 10 kPa(0.1 bar/1.45 psi), the PCM sets DTC P0107.
Item | Detecting Condition | Possible Cause | |
Case 1 | DTC Strategy |
•
Signal check, low. | 1. Poor connection 2. Short to ground in signal circuit 3. MAPS |
Enable Conditions |
•
Engine speed greater than 80 rpm. | ||
Threshold Value |
•
Sensor voltage less than 0.2 V. | ||
Case 2 | DTC Strategy |
•
Out-of-range low. | |
Enable Conditions |
•
- | ||
Threshold Value |
•
MAP less than 10 kPa(0.1 bar/1.45 psi). | ||
Diagnostic Time |
•
Continuous. | ||
MIL ON Condition |
•
2 driving cycles. | ||
