If the sensor input signal is higher than 4.8V or the range of the MAP is higher than 110 kPa(1.1 bar/15.95 psi), the PCM sets DTC P0108.
Item | Detecting Condition | Possible Cause | |
Case 1 | DTC Strategy |
•
Signal check, high. | 1. Poor connection 2. Open or short to power in signal circuit 3. MAPS |
Enable Conditions |
•
Engine speed greater than 80 rpm. | ||
Threshold Value |
•
Sensor voltage greater than 4.8 V. | ||
Case 2 | DTC Strategy |
•
Out-of-range high. | |
Enable Conditions |
•
- | ||
Threshold Value |
•
MAP greater than 110 kPa(1.1 bar/15.95 psi). | ||
Diagnostic Time |
•
Continuous. | ||
MIL ON Condition |
•
2 driving cycles. | ||
